KALU INDUSTRY
KALU Industry--Leaf Metal Quality, Price, Credit Standing and Service
Add to Cart
Big Size 300-400mm Diameter Aluminum Extrusion Profiles by 6800 ton Press
1, Aluminium Alloy Composition:
| Chemical Composition | 6063 T5 | ||||||||
| Si | Fe | Cu | Mn | Mg | Zn | Ti | Cr | Others | total others |
| 0.2-0.6 | M.0.35 | M. 0.1 | M. 0.1 | 0.45-0.9 | M. 0.1 | M. 0.1 | M. 0.1 | M. 0.05 | 0.15 |
| Mechanical property | |||||||||
| Yield Strength | Tensile Strength | Extensibility | hardness | ||||||
| 110Mpa | 160Mpa | 8% | 8 HW | ||||||
| Chemical Composition | 6063 T6 | ||||||||
| Si | Fe | Cu | Mn | Mg | Zn | Ti | Cr | Others | total others |
| 0.2-0.6 | M.0.35 | M. 0.1 | M. 0.1 | 0.45-0.9 | M. 0.1 | M. 0.1 | M. 0.1 | M. 0.05 | 0.15 |
| Mechanical property | |||||||||
| Yield Strength | Tensile Strength | Extensibility | hardness | ||||||
| 180Mpa | 205Mpa | 8% | |||||||
2, Aluminium profiles(classifcation according to surface treatment requirements):
1. Anodizing profiles
2. Electrophresis profiles
3. Powder coating profile.
4. Wood finish profiles
5. Polished profiles
6. PVDF coating profiles
3, Manufacture technological process:
Chief manufacture technological process:
aluminium ingot & alloy→melting and casting→extrusion→powder coating→pouring rubber for heat insulation→checkout→packing→PVDF coatinganodizingelectrophoresis→put in products warehouse.
1. Prices fob:
Need receive your draws and need surface treatment.
2. Payment terms:
30% advance payment and balance payment before the goods load into the container.
3. Handing time:
normally extrusion workshop 12hours and other workshop 9hours.
4. MOQ:
any small order quantity always best welcome.
but normally the cost for 1x40'or1x20'container order quantity are lowest cost. 40' about 20-26tons and 20'about 8-12tons.
normally if one set tooling die mould finish 3-5tons then no any die mould charge. but no problem. we will also return back the die mould money after the order quantity finish 3-5tons in 1 year.
normally one set die mould finish 300kgs then no any added machine cost.
Do not worry about that you can feel freely choose and confirm you need order quantity. anyway I will try my best supply you lowest prices.
5. Delivery time:
normally produce new die mould and sample about need 15days. 1x20'or 40'container order quantity about need 15-30days.
but we will try our best to supply you according to your need times.
24 hours services !
yuki@xinyu-aluminum.com